| Q:
|
Is it possible to line a pipe through a clean-out to prevent
digging?
|
| A: |
Yes, it is possible to line through certain cleanouts. However, you may need a proper cutting device
to go into the pipe and cut the cured liner open at the bottom.
|
| Q: |
Can I effectively line a pipe, such as a drain line, that has a 90 degree bend? |
| A: |
Yes you can. The Max WovoLiner is a soft, woven, extremely flexible liner that
was specifically designed with this scenario in mind. The WovoLiner will
effectively negotiate bends with minimal binding or wrinkling, and will also be
effective for diameter transitions.
|
| Q: |
Most laterals in my
area start out as 4" cast iron and transition to 6" clay. Is this possible to
line? |
| A: |
Yes it is. MaxLiner
carries two different liners, the Max FlexLiner, and the Max WovoLiner, which
both have substantial expansion to perform some diameter
transitions.
|
| Q: |
How do I learn to use
the MaxLiner System effectively? |
| A: |
Upon delivery of your
MaxLiner System (or a date selected by you), our trained experts will arrive on
site to ensure you get the proper training. At MaxLiner, we prefer to do our
training on an actual jobsite, so the learning process begins immediately. Our
staff will remain available until you feel you are ready to proceed on your
own.
|
| Q: |
How will I know which
resins and liners to use for a specific job? |
| A: |
MaxLiner's Inversion
Chart on our website indicates specific uses for our wide selection of resins
and liners. Also, our technical services staff remains available 24 hours a day for your
questions.
|
| Q: |
How long does it take
for MaxLiner's MaxPox Resins to cure ambiently? |
| A: |
There is no exact
answer to this question, as there are many different variables involved (i.e.
ground temperature, quantity of resin, type of resin, etc.). We can, however,
tell you that the time frame for unassisted curing ranges from from 4 to 12 hours.
|
| Q: |
What makes the MaxLiner
System better than the others? |
| A: |
Although air inversion installations have been
implemented for years, we at MaxLiner believe that what makes us stand out
is not only our inversion method, but also the portability of our relining
system. Our Max LinerGun weighs only 33 pounds which makes inversions from
roof drains and other confined spaces easy.
|
| Q: |
How long will it take
for me to receive materials and equipment from MaxLiner? |
| A: |
MaxLiner's Distribution
Plant in Martinsville, Virginia carries a vast amount of inventory for our
Customers. If the item you are requiring is in stock in Martinsville, it should
be at your facility in approximately 7 days for standard shipping. If, by chance, these items are
not in stock, please allow 2-4 weeks for delivery.
|
